Casting process

Free training

Cases

Videos

Process

CASTING PROCESS

Influence of Lost Foram Equipment on Lost Foram Process

The lost vanity mold process equipment is a necessary condition to ensure the implementation of the lost vanity mold process, and it also affects the quality of castings to varying degrees. Among them, the quality of the white mold, the pouring process and the sand treatment play a very important role in the whole process of the lost-form process. This paper mainly stands in the perspective of the process to the above-mentioned process of the loss of the key equipment for a concise analysis, the purpose is to clarify how to ensure the smooth implementation of the process.

2022

04-14

Process Control of the Motor Shell Lost Molding

Before the Fujian site, the motor case was produced by the tide mold sand process, which has low production efficiency and high labor intensity, poor product appearance quality and heavy cleaning workload. With the promotion and wide application of the lost vanishing mold process [1], the factory introduced the lost vanishing mold process to produce the motor shell. Due to the limitation of technology and other convenience, the surface continuity of the mechanism white mold is poor, the surface quality of the cast castings is not good, and there are defects such as slag inclusion, sand addition, cold isolation, deformation, etc. Entrusted by the factory, we are here to provide technical guidance and services, from raw materials advance, white mold drying, brushing and drying, group molding process to buried box modeling and pouring to strictly control, to solve the problem of disappearance.

2022

04-08

Optimization of lost foam casting process for grate bar

The reasons for the low production efficiency and high rejection rate of the lost foam casting of the ZGCr20Mn14Si2N material grate bar are analyzed. By optimizing the original process, the defects of slag and sand inclusion in the casting were solved, and the production efficiency was improved and the production cost was reduced.

2022

04-01

Gray cast iron flywheel and table plate lost mold process for high-speed punch press.

These two castings are used for high-speed 65-ton punching machines with large stress load and continuous operation of punching. Shrinkage and porosity are not allowed inside, and the internal structure must be dense.

2022

02-17

Deformation Problems of Lost Foam Casting and Anti-deformation Measures of Typical Castings

In this paper, the deformation problem of lost foam casting is expounded, and an effective way to solve the deformation problem is recommended through the production process of manhole cover manhole ring.

2022

01-29

Blast furnace cooling stave casting paper

The cooling stave is an important component in the cooling system of the blast furnace. It is installed in the furnace body, furnace waist, furnace belly, furnace cylinder and other parts of the blast furnace. It has the important functions of supporting refractory materials, cooling the furnace shell, and maintaining a reasonable furnace shape. The cooling stave not only bears high temperature, but also bears the abrasion of the furnace charge, the erosion of molten slag and the scouring of gas flow, must have good thermal strength, thermal shock resistance, resistance to quenching heat and other comprehensive performance.

2022

01-12

Casting Production Process of Transmission Box

Agricultural machinery transmission box material HT200, the structure is more complex, although the overall better casting, but in the actual implementation of the production process will still appear many problems, so here to share the exchange of experience, for the first time to use the lost foam production line of enterprises in the technical improvement is of great help, from which to learn together to improve, enrich the experience of lost foam casting production methods.

2021

12-22

Process design of lost foam casting for wall plate of sintering machine

As a new casting process, lost foam casting has a great advantage over the traditional casting method, and its process is also quite different from it. Nevertheless, there are still many places in the traditional casting process that are worth absorbing and summarizing. This paper takes the sintering machine wall plate as an example to illustrate this point.

2021

12-06

Ear plate lost foam casting process

Lost foam casting is one of the most advanced casting processes in the world. It is known as a "revolution" in the history of casting, and it is called green casting in the 21st century at home and abroad. Through this casting example of Anyang site ear plate, to provide a reliable reference for the follow-up similar material plate.

2021

11-19

Lost Foam Casting Process of Flywheel Shell

In this paper, the lost foam casting process of the flywheel shell is recorded in detail through the on-site process summary. The lost foam process production of flywheel shell, in the actual production process encountered technical problems, this paper from the selection of raw materials, pre-molding, paint brushing, gating system design and buried box pouring and other aspects of the entire production process in detail, and analysis of the casting defects, optimize the process.

2021

11-11

< 1234567 >
Leo.

Power by:300.cn |SEO|Business License

Face 领英 推特
Picture Name

Wechat

Picture Name

WhatsApp

Picture Name

Social media