ruiou

ruiou

Casting process

Casting process

CASTING PROCESS

Casting Process of Flywheel and Table Lost Foam for 65 Tons High Speed Punch

The flywheel and table plate mentioned in this paper are used on a 65-ton high-speed punch. Aiming at the difficulties in the production of such high-end castings for export by lost foam casting, a series of process measures are adopted in this paper. Through the reasonable design of the runner, reduce the density of the white mold, increase the continuity of the white mold, increase the strength of the coating to resist the washing of the molten iron, add the insulation riser, place the external cold iron, adjust the composition of the molten iron and other measures to avoid the related defects. The successful casting of the chemical composition, mechanical properties and product quality fully meet the technical requirements of the casting, has been recognized by foreign customers, but also for the future of the lost foam casting production of such castings provides a good experience.

2022

08-23

The paper on the process of calcium carbide pot lost mode.

This paper mainly describes the production process of a field calcium carbide pot lost model in Xinjiang, and some links in the production process of calcium carbide pot are improved, so as to obtain the experience of mature lost model production of calcium carbide pot.

2022

08-06

Lost Foam Casting Process of Hanging Pieces for Vertical Drying Kiln

The casting process of vertical drying kiln for cement plant is introduced. The problems of sand inclusion, porosity and shrinkage in the casting production process were analyzed, and the corresponding measures were taken to effectively control the defects, the material properties met the technical requirements, and the rationality of the process design was verified.

2022

08-03

Process Scheme for Flat Parts

White mold, yellow mold, runner design, buried box photo and introduction of the original scheme for flat parts

2022

07-28

Concrete Implementation Scheme of Process Control Plan for Lost Form of Pump Shell

The Amustrang pump casing control plan needs a targeted implementation plan to implement. It requires each step-by-step management personnel to fulfill their duties, carefully record production data, carefully find abnormal problems and timely feedback to technicians. Adopt a zoning management system to refine the process of implementing all documents.

2022

07-26

Summary of the lost mold process of the pallet

In this paper, according to the structural characteristics of the three pallets (products), the production process of lost vanescent mold is formulated in line with the actual production situation. Including brushing paint, paint drying, bonding group, buried box modeling and pouring process.

2022

07-21

Process Flow of Lost Foam Casting Machine Tool Base

This paper mainly describes the main body of CNC machine tools using lost foam casting to produce a process. Gray cast iron itself has good casting performance and because the material has the characteristics of shock absorption, compression resistance, corrosion resistance, and not easy to deform, it is consistent with the mechanical performance requirements of the main body of the machine tool. Therefore, gray cast iron has become the best choice for machine tool parts and is also popular in the entire casting industry.

2022

07-18

Product Process Analysis of Lost Foam Casting Machine Tool Parts

This paper analyzes the development of lost foam casting technology in the production of machine tools in China, and thinks that it has reached the stage of stable improvement, and makes an objective analysis of the characteristics and scope of application of the casting process for machine tools. The process of lost foam casting production machine tool castings is analyzed, and the process measures to solve the defects are discussed, and finally the development trend and direction of lost foam casting in China are predicted.

2022

07-04

Casting Process of Lost Foam for Grinding Ball

The advantages and process characteristics of lost foam casting are especially suitable for the casting of grinding balls. It gives full play to the characteristics of investment casting that can be grouped and poured in series, and does not need crust. It has the advantages of high process yield, high production efficiency and high product quality. Lost foam casting grinding ball is a relatively simple type of lost foam casting process.

2022

07-01

Prevention of several defects of lost foam casting anode steel claw

In this paper, according to the production situation of a field anode steel claw workshop in northern Xinjiang, the process is briefly introduced, and several defects in the production process of anode steel claw are analyzed, and corresponding preventive measures are put forward to improve the production quality of anode steel claw.

2022

06-30

< 1 2 3 4 5 6 >

Leo.

Power by:300.cn |SEO|Business License

Innovation Building, 453 Yuhua East Road, Shijiazhuang High-tech Zone

product hotline: 0311-85485256

Liu Zong: 18631103369

Email: rolfc_cn@163.com

Picture Name

Wechat

Picture Name

Mob web