lost foam casting the module production by mechanical arms
Release time:
2026-10-13 11:25
Source:
This section mainly introduces the modules production by mechanics. The white model is the core part of lost foam casting technology. Whether it is the buried box way, vibrating effect, casting speed,temperature, negative pressure degree or sand model choice, mesh number choice, they are all for displacing into material and appearance parts required by us in the lost foam technology, such as in this way:
However, the model production machinery status in the lost foam casting technology is the soul of shaping, shaping the white model. Now, the model production way in the lost foam casting field has two common model production ways: the mechanical model production of semi-automatic molding machine and manual model production of manual cutting table. In addition, there is the foam plastic carving machine for fully automatic model production, which is seldom used. So we can see that the model production mechanism gradually develops from manual way into automatic way and go forward from mechanism into intelligence. Now we can recognize them respectively. First what we should introduce is the manual cutting table. See the picture.
2.4.1 The cutting table

It is mainly composed by cabinet body, vertical screw combination, horizontal slider combination, voltage regulator, electric resistance wire and other parts. The following picture us voltage regulator.

By voltage regulator, it can regulate the calorific value of electric resistance wire. By vertical screw combination and vertical slider combination, it can regulate the electric resistance wire’s height and angle. By regulating different height and angle, we can cut simple and regular model shapes, such as rectangle, trapezoid and rhombus and so on. Then, we can see the following two pictures. Now we analyze how to make these products?
Now, by making the white model, we let everyone to know the basic flow of special shape parts on the model cutting table initially:
1) The part analysis: we can see the part structure of one main body, two circular ring and one convex table. By model cutting table, we can respectively make these parts easily and then bond them together. The part production is finished.
2) The model aluminum plate production: we can restore the main body size, circular ring size and convex table size to the aluminum plate. With scissors, we can shear all shapes of all parts.
3) The material feeding. We can adjust the regulating handle on the vertical screw combination of model cutting table to adjust the height between electric resistance wire and glass plate to the corresponding height. Then we can feed material respectively and cut corresponding raw material of three parts thickness: main body, circular ring and convex plate.
4) Fix the aluminum plate and feed material. We can fix the aluminum plate respectively to raw material with pins. Then we can adjust the electric resistance wire height. We take the models with our hands firmly and make wiring along the aluminum plate. The speed should keep uniform and stable. After cutting, we can take pins and take the aluminum plate down.
5) Cohesion. After all parts are made completely, we can cohere all parts by gel based on parts size and polish the cutting part of white model flatly and smoothly with sand paper. A complete white model is made completely.

Above the model, there is sinking, cambered surface and circular groove. It requires us to have more abundant imagination and creativity. The small electric resistance wire in your hand can be used to complete a model production by changing all shapes. The model cutting table is mainly used for special part production and auxiliary part production which is difficult to make by automatic and semi-automatic molds production equipment. The simple model production of small lost foam foundries belong to widely used mold production mechanics in the lost foam casting field.
It introduces semi-automatic molding machine next. Based on drive type, it can be divided into screw molding machine and hydraulic molding machine. Please see the picture.
The molding machine is mainly composed by machine frame, fixed mould, movable mould, steam, water bag, pneumatic, electric control system, material feeding device, power device and mould. By movable mould’s demotion, the upper and lower parts combines into mould cavity. The material feeding device injects the pre-foamed and cured foam beads into the cavity. Then it fills up with steam. In the high temperature steam, foam beads preform and expands again to make them cohere together without gap. Then it stops to supply steam and begins to supply the cold water for cooling model and mould. After all is cooled, the movable model moves up. It fills up with compressed air to blow the model from model cavity. The model production is complete. The equipment has the characteristics of quick model production speed, simple operation, the semi-automatic operation way, good model quality and producing complex model and so on. It is widely used in the lost foam foundry and gets great praise of many customers. We can see two examples of white models made by molding machine.



The above two mold production mechanics are the most commonly used mold production mechanics for the present lost foam foundries. By two mechanics above, it can nearly complete all different models production. However, the steam boiler acquisition has strict limit in some districts. Some manufacturers choose another mold production mechanics, that is foam plastic model engraver. Now we can understand this kind of mold production mechanics.
Related News