Casting process

Free training

Cases

Videos

Process

CASTING PROCESS

Prevention of several defects of lost foam casting anode steel claw

In this paper, according to the production situation of a field anode steel claw workshop in northern Xinjiang, the process is briefly introduced, and several defects in the production process of anode steel claw are analyzed, and corresponding preventive measures are put forward to improve the production quality of anode steel claw.

2022

06-30

Casting Process of Lost Foam for Anode Steel Claw

Through the study of the production practice of the anode steel claw lost foam, the process performance of the anode steel claw lost foam casting is analyzed from the design of the white mold forming, yellow area brushing, black area casting and pouring system.

2022

06-27

Rolling mill guide block lost foam casting process paper.

This paper describes the use of vanishing mold casting method to produce rolling mill equipment components guide block, its main mechanical properties have high temperature and wear-resistant characteristics through the description of its casting process design ideas, coating brush drying process and buried box pouring pouring operation, shot blasting grinding cleaning, heat treatment annealing comprehensive explanation of the vanishing mold production process.

2022

06-24

Lost Foam Casting Process of Centrifugal Casting Machine Mould

Lost foam is a new casting method in the 21st century. It has the characteristics of high dimensional accuracy, small processing volume and high surface finish. Especially in the situation of national environmental protection, the advantages of energy saving and environmental protection of lost foam casting are more obvious. Through on-site process practice, the lost foam casting process of the mold of the centrifugal casting machine is recorded in detail from the yellow area to the casting.

2022

06-17

Analysis of Lost Foam Casting Process for Water Pump Impeller

2022

06-13

Lost Foam Casting Process of Single Cylinder Wheel

This paper introduces the lost foam casting process of single cylinder wheel of diesel engine, and introduces the process performance of single cylinder wheel from white area, yellow area and black area.

2022

06-09

Production Process Paper of Mold

The meeting head is an intermediate connecting block used to connect the collision body on a small coal mining truck in the coal mining industry. The structure is relatively complicated and easy to deform.

2022

06-07

Coal wheel lost mold production process paper.

The coal wheel is a kind of walking wheel of a small coal mining truck in the coal mining industry. The outer contour diameter is about 400mm, and the thinnest wall thickness is 11mm. It is a thin-walled part.

2022

06-01

Lost Foam Casting Process for Main Reduction of Rear Axle

Through the on-site process summary, the lost foam casting process of the rear axle main reducer is recorded in detail. In this paper, the selection of raw materials, pre-molding, coating brushing, gating system design and buried box pouring and other aspects of the entire production process are described in detail.

2022

05-23

The paper on the process of producing farm tools and castings in lost-time mold.

Before the customer site using sand casting process to produce hammers, chain links and other castings, the process has low production efficiency, poor working environment, high labor intensity of workers, product surface quality is not good and many other problems. With the rapid development of lost foam casting technology in China and the advantages of low labor cost, energy saving and environmental protection, and good surface quality, people began to try to use lost foam casting to produce such castings.

2022

05-16

< 123456 >
Leo.

Power by:300.cn |SEO|Business License

Face 领英 推特
Picture Name

Wechat

Picture Name

WhatsApp

Picture Name

Social media